Program for static analysis of multispan continuous beam (up to five spans with two cantilevers). Sections of spans may be different. It is also possible to take into account the flexibility of support. Arbitrary load may be defined for three load cases.
Diagrams of displacements, rotation angles, bending moments and shear forces are presented when analysis is performed.
Influence lines in continuous beams
The program enables you to generate influence lines of displacements, rotation angles, bending moments and shear forces from moving loads in multispan continuous beam (up to five spans with two cantilevers). Sections of spans may be different. It is also possible to take into account the flexibility of support. Moving load defined by the user is computed as well as standard loads A8 and A11.
Analysis of trusses
The program enables you to determine nodal displacements and forces in elements of plane trusses of various shapes that are most widely used in practice.
Analysis of parametric plane frames
Program for static analysis of plane frames of various shapes that are most widely used in practice. Diagrams of displacements, bending moments, axial and shear forces are available when analysis is performed.
Analysis of plane frames
Program for static analysis of plane frames and trusses of various shapes under arbitrary forces and displacements. Diagrams of displacements, bending moments, axial and shear forces are available when analysis is performed.
Analysis of rectangular slab on elastic foundation
Program for static analysis of rectangular slabs on elastic foundation. Loads are defined as uniformly distributed across the whole slab or across the specified surface, as linear and concentrated loads. When analysis is performed, you will obtain contour plots of forces and displacements as well as stresses in foundation. Their numerical values in the specified points will be displayed in the report.
Analysis of rectangular slab
Program for static analysis of rectangular floor slabs with rectangular opening in arbitrary location. Supports may be defined anywhere on the contour. Loads are defined as uniformly distributed across the whole slab or across the specified surface, as linear and concentrated loads. When analysis is performed, you will obtain contour plots of forces and displacements. Their numerical values in the specified points will be displayed in the report.
Analysis of wall-beam
Program for static analysis of wall-beams with rectangular opening in arbitrary location. Supports may be defined anywhere on the lower edge. Loads are defined as non-uniformly distributed or concentrated on the upper edge. When analysis is performed, you will obtain contour plots of stresses and displacements. Their numerical values in the specified points will be displayed in the report.
Analysis of shell on rectangular plan
Program for static analysis of convex parabolic, cylindrical and spherical shells. The contour that the shell is supported by has rectangular shape. Loads are defined as uniformly distributed across the whole shell area or across the specified surface, as linear and concentrated loads. When analysis is performed, you will obtain contour plots (in shell) and diagrams (in contour). Their numerical values in the specified points will be displayed in the report.
Products 
